ISCO FlowCalc 2.0.3
Continue to app
Free Version
Publisher Description
Calculates flow rates in open, non-full channels and pipes. Spot-check the performance of installed flow monitoring systems.
This app calculates flow rates in open, non-full channels and pipes. Use this app to spot-check the performance of installed flow monitoring systems, or verify that newly installed flow meters are configured correctly. This app includes level-to-flow rate calculations for primary devices and area-velocity flow rate calculations for a variety of conduit shapes.
You can display flow rate units as cubic feet per second (cfs), gallons per minute (gpm), or million gallons per days (mgd). By changing the app settings to SI units, you can display flow rates as liters per second (lps) or cubic meters per hour (m3h).
Level-to-Flow Rate Calculations for Primary Devices
Enter the head height using convenient sliders to calculate flow rates in the following primary devices:
• Parshall flumes from 1 inch to 12 feet (0.0254 to 3.66 m)
• Palmer-Bowlus flumes from 4 to 30 inches (0.102 to 0.762 m)
• V-notch weirs: 22.5, 30, 45, 60, 90, 120 degrees
• Rectangular weirs with end contractions from 1 to 10 feet (0.3 to 3.0 m)
• Rectangular weirs without end contractions from 1 to 10 feet (0.3 to 3.0 m)
Area-velocity Flow Rate Calculations
Enter the head height, velocity, and dimensions to calculate flow rates in these channel shapes:
• Round pipes to 30 feet (10 m) in diameter
• U-shaped channels to 30 feet (10 m) wide
• Rectangular channels to 30 feet (10 m) wide
• Trapezoidal channels to 30 feet (10 m) wide
• Elliptical pipes to 30 feet (10 m) wide
Save your frequently-used calculations as Favorites. This handy feature lets you quickly access calculations by site name and map your location when GPS data is available.
All flow rate calculations are based on equations published in the ISCO Open Channel Flow Measurement Handbook, Eighth Edition. This definitive reference book, published by Teledyne ISCO, is widely used by water and wastewater monitoring professionals.
Disclaimer: The equations used in this calculator were obtained from sources deemed to be reliable. Neither Teledyne ISCO nor anyone acting on its behalf makes any warranty with respect to the accuracy, completeness, or usefulness of the app features. Teledyne ISCO shall not be held liable for any damages that arise from the use of this app.
May 29, 2020 Version 2.0.3
Improved registration process with better defaults and smoother entry.
Ensures email is configured before assisting the client in sending message to a customer service.
About ISCO FlowCalc
ISCO FlowCalc is a free app for iOS published in the System Maintenance list of apps, part of System Utilities.
The company that develops ISCO FlowCalc is Teledyne Isco Inc.. The latest version released by its developer is 2.0.3.
To install ISCO FlowCalc on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2020-05-29 and was downloaded 49 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the ISCO FlowCalc as malware if the download link is broken.
How to install ISCO FlowCalc on your iOS device:
- Click on the Continue To App button on our website. This will redirect you to the App Store.
- Once the ISCO FlowCalc is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
- If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
- After ISCO FlowCalc is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
- Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.
